Hello A-Team !!!!!
These final weeks of class, are all about using the knowledge that you have gained all semester. Go for it !!!! Show me how much you learned !!!!
Please Join Us!
Note: I will be bringing to class your hours up to January 10th. Since this is about half your grade….ask me what it is. Remember: Below 30 hours, the rule is not to give a grade. 30 hours gives you an incomplete. 80% of the hours listed for the course gives you a C or better, if you complete your project(s).
Drafting and Flat Patternmaking: We are in the midst of making our final patterns. They should be completed this week. Then you have about a week and a half to make up a sample garment. How Exciting !!!!! I am ready with my cell phone camera !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Using Your First Commercial Pattern: Last week, I demoed sleeve input, elastic waistband insertion, collars, and buttonholes. Five students have finished their PJs. I have pictures. One student made “PJs” for her cat! She even took pictures of her cat. They are moving on, to their second project.
The only demo that didn’t go as planned was buttonholes. I couldn’t figure out why. As an instructor, I wanted to make this easy for you. So over the weekend, I Googled it. I discovered that flannel and fleece buttonholes were troublesome for a lot of sewers. The following is what I found. Next week, I will demo buttonholes again and they will go better.
Tip: Always do a couple of practice buttonholes on a scrap of the fabric you will be using. Some fabrics, like knits or flannel, are kind of spongy and don’t feed as easily. You may need a longer stitch length on these. If your fabric is stretchy or slippery, you can stabilize it with a little fusible interfacing on the wrong side before stitching your buttonhole. Once you’ve done a practice one, cut it open and make sure that your button goes through easily.
Now perhaps you’d like to adjust the stitching on your buttonhole. The buttonhole on the left has a longer stitch length of almost 1mm while the buttonhole on the right has a very short stitch length of .25mm. While a shorter stitch looks nice, be aware that some fabrics don’t feed as easily and they may jam when the stitch length is too short. So always do a couple of practice buttonholes on a scrap of your fabric.
Try turning your fabric around and making the buttonhole the opposite way. This might help you avoid the seam unevenness. I do it this way when making buttonholes at the top of a line dresses, boys jonjons, etc. and the layers of fabric are too thick. Normally you would start at the top, but mark the length and start at the bottom of the buttonhole. Sometimes it works:)
www.maxantbuttonandsupply.com Ever need to cover buttons or belts? This is the place to go!!!!
http://britexfabrics.cmail5.com/t/ViewEmail/r/7DAB885FCDC1E4CD/20E7279942C142F2D3AB5F5EEC5F0895 Britex Blog and Sale This place is NOT to be missed when you travel to San Francisco.
http://www.scabal.com/mailings/070113_con_2.htm Scabal: a passion for cloth.
http://www.threadsmagazine.com/item/29042/how-to-edgestitch-and-topstitch-a-collar-lapel/page/3 How to Edgestitch and Topstitch a Collar Lapel
http://link.realage-mail.com/YesConnect/HtmlMessagePreview?a=Oi0sTescbRqV8RkNqoMwesx2 RealAge Health Videos. I haven’t seen ALL the videos. Weigh in on the ones you like the most.
See you all in class!!!!!!!!!
Make Money with your Skills !©
San Diego Continuing Education
Hospitality & Consumer Science